Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 10 of 10

Thread: C'Sink Stand

Hybrid View

  1. Sep 7, 2018, 06:16 PM #1
    Shelly142
    Shelly142 is offline
    Supporting Member
    Join Date
    Feb 2015
    Location
    Prescott, AZ
    Posts
    62
    Thanks
    2
    Thanked 112 Times in 31 Posts

    Shelly142's Tools
    Awards Showcase
    Supporting Member Homemade Tool of the Week Winner 10 Posts
    Total Awards: 3

    C'Sink Stand

    Finally got tired of rummaging through my tool chest and searching for the appropriate c’sink.
    Here is a simple and useful project that can be built in about half a day or so. The CAD l/o
    probably took longer to develop than the actual time spent in fabrication.
    C'Sink Stand-csink-stand-no-1.jpg
    C'Sink Stand-csink-stand-no-2.jpg
    C'Sink Stand-csink-stand-no-3.jpg
    Reply With Quote Reply With Quote

  2. The Following 9 Users Say Thank You to Shelly142 For This Useful Post:

    emu roo (Jun 20, 2025), Home-PC (Jan 20, 2023), Jon (Sep 7, 2018), old_toolmaker (Sep 9, 2018), Paul Jones (Sep 11, 2018), PJs (Sep 12, 2018), rossbotics (Sep 8, 2018), Seedtick (Sep 10, 2018), Stevohdee (Sep 10, 2018)
  3. Sep 8, 2018, 01:17 AM #2
    rossbotics
    rossbotics is offline rossbotics has agreed the Seller's Terms of Service
    Supporting Member rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    731
    Thanks
    1,019
    Thanked 1,870 Times in 462 Posts

    rossbotics's Tools
    Awards Showcase
    Supporting Member 50-Time Best Discussion Winner 25-Time Homemade Tool of the Week Winner 25-Time Best Discussion Winner 100 Posts 10-Time Homemade Tool of the Week Winner 10-Time Best Discussion Winner Best Documented Build Winner 5-Time Homemade Tool of the Week Winner 3-Time Homemade Tool of the Week Winner Homemade Tool of the Week Winner
    Total Awards: 11
    Nice little caddy

    Doug
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber


    Tool Plans for Sale by rossbotics




    ​
    Reply With Quote Reply With Quote
  4. Sep 8, 2018, 04:30 PM #3
    Shelly142
    Shelly142 is offline
    Supporting Member
    Join Date
    Feb 2015
    Location
    Prescott, AZ
    Posts
    62
    Thanks
    2
    Thanked 112 Times in 31 Posts

    Shelly142's Tools
    Awards Showcase
    Supporting Member Homemade Tool of the Week Winner 10 Posts
    Total Awards: 3
    Doug,
    Thank you for the positive comment.
    Phil
    Reply With Quote Reply With Quote
  5. Sep 9, 2018, 09:28 AM #4
    old_toolmaker
    old_toolmaker is offline old_toolmaker has agreed the Seller's Terms of Service
    Supporting Member old_toolmaker's Avatar
    Join Date
    Dec 2017
    Location
    Cape Coral, FL
    Posts
    579
    Thanks
    647
    Thanked 533 Times in 232 Posts

    old_toolmaker's Tools
    Awards Showcase
    Supporting Member 10-Time Best Discussion Winner 3-Time Homemade Tool of the Week Winner 100 Posts Homemade Tool of the Week Winner
    Total Awards: 5
    Nice organizational project, Phil and well done. Should last more than one lifetime the way it is built. Thanks for posting. It gives me an incentive to produce one for my shop. What did you use for material?
    Dick


    Links to some of my plans:

    https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
    http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
    http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
    http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
    http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
    Reply With Quote Reply With Quote
  6. Sep 9, 2018, 01:38 PM #5
    Shelly142
    Shelly142 is offline
    Supporting Member
    Join Date
    Feb 2015
    Location
    Prescott, AZ
    Posts
    62
    Thanks
    2
    Thanked 112 Times in 31 Posts

    Shelly142's Tools
    Awards Showcase
    Supporting Member Homemade Tool of the Week Winner 10 Posts
    Total Awards: 3
    old_toolmaker,
    Thanks for your interest. The sheet stock is some 16ga. Hot Roll Steel. The standoffs and nuts were made from 1018 Cold Roll.
    Phil
    Reply With Quote Reply With Quote
  7. Sep 9, 2018, 02:26 PM #6
    old_toolmaker
    old_toolmaker is offline old_toolmaker has agreed the Seller's Terms of Service
    Supporting Member old_toolmaker's Avatar
    Join Date
    Dec 2017
    Location
    Cape Coral, FL
    Posts
    579
    Thanks
    647
    Thanked 533 Times in 232 Posts

    old_toolmaker's Tools
    Awards Showcase
    Supporting Member 10-Time Best Discussion Winner 3-Time Homemade Tool of the Week Winner 100 Posts Homemade Tool of the Week Winner
    Total Awards: 5
    Shelly142,

    Thanks! I was unsure if the material was metal or some type of plastic sheet stock.
    Dick


    Links to some of my plans:

    https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
    http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
    http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
    http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
    http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
    Reply With Quote Reply With Quote
  8. Sep 10, 2018, 07:53 PM #7
    old_toolmaker
    old_toolmaker is offline old_toolmaker has agreed the Seller's Terms of Service
    Supporting Member old_toolmaker's Avatar
    Join Date
    Dec 2017
    Location
    Cape Coral, FL
    Posts
    579
    Thanks
    647
    Thanked 533 Times in 232 Posts

    old_toolmaker's Tools
    Awards Showcase
    Supporting Member 10-Time Best Discussion Winner 3-Time Homemade Tool of the Week Winner 100 Posts Homemade Tool of the Week Winner
    Total Awards: 5
    Shelly142,

    My countersinks live in two steel blocks with holes for their shanks but I don't have space for all.
    Dick


    Links to some of my plans:

    https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
    http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
    http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
    http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
    http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
    http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
    Reply With Quote Reply With Quote
  9. Sep 10, 2018, 05:38 PM #8
    Stevohdee
    Stevohdee is offline
    Supporting Member
    Join Date
    Jun 2018
    Posts
    227
    Thanks
    90
    Thanked 740 Times in 130 Posts

    Stevohdee's Tools
    Awards Showcase
    25-Time Best Discussion Winner 10-Time Homemade Tool of the Week Winner 5-Time Homemade Tool of the Week Winner Supporting Member 3-Time Homemade Tool of the Week Winner 100 Posts 10-Time Best Discussion Winner Homemade Tool of the Week Winner
    Total Awards: 8
    Very handy, my countersinks currently live in 4 locations in the shop, need to centralize, thanks for you post
    Reply With Quote Reply With Quote
« Making Hydraulic Chain Excavator | Storing Ratchet Straps for Quick Deployment »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules