LinkBack URL
About LinkBacks
![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D7246%23post7246&media=http%3A%2F%2Fimages116.fotki.com%2Fv695%2Fphotos%2F5%2F904975%2F12609672%2FMVC002F-vi.jpg&description=Drive Adapter for HF Elec Pipe Threader by astroracer - We left about .030 at the bottom of the cut to hold all of the pieces together.
This is the "spindle=" for the adapter. I cut a chunk of 1 1/4=" dia. steel, cleaned it up in the lathe and bored a .75 hole thru the middle.
Drilled and tapped two holes on one end, 90 degrees apart, to clamp the adapter to the shaft.
See next post= "Pin It")
We left about .030 at the bottom of the cut to hold all of the pieces together.
This is the "spindle" for the adapter. I cut a chunk of 1 1/4" dia. steel, cleaned it up in the lathe and bored a .75 hole thru the middle.
Drilled and tapped two holes on one end, 90 degrees apart, to clamp the adapter to the shaft.
See next post
Reply With Quote
Bookmarks