Hi everyone,
Below is part 3 of a small series I've done about building a Tool Cutter sharpener/grinder
https://www.youtube.com/watch?v=lwVmu__9d7I&t=3s
Printable View
Hi everyone,
Below is part 3 of a small series I've done about building a Tool Cutter sharpener/grinder
https://www.youtube.com/watch?v=lwVmu__9d7I&t=3s
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks MachineNZ! We've added your Endmill Sharpener to our Sharpening category,
as well as to your builder page: MachineNZ's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-endmill-sharpener"> <img src="/uploads/224354/homemade-endmill-sharpener.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-endmill-sharpener">Endmill Sharpener</a> <span> by <a href="http://www.homemadetools.net/builder/MachineNZ">MachineNZ</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/sharpening'>sharpening</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
When I spent some time in a repair shop, never quite knew that one of our line boring bars would suit a particular job, when a pump came in. Small shop-made bars haven't room for an adjustment mechanism as MachineNZ points out.
So, a creative member made a clamp on adjuster. It was a Vee-block with a 10-32 screw penetrating through the vee's center, making the indicator perform reliably.
Any one use one of these end mill sharpening fixtures?Attachment 40187
I got one several years ago but it had very little information with it.