Finishing the Working End of a Plastic Woven Line

[Nick79]

i must be doing it all wrong. I use shrink tube on the line at the point I will cut - before cutting. Shrinks up tight then cut the line and tube at the same time.

[rgsparber]

i must be doing it all wrong. I use shrink tube on the line at the point I will cut - before cutting. Shrinks up tight then cut the line and tube at the same time.

Nick,

I'm the one doing it wrong. When I tried shrink tubing, my heat gun did strink the tubing, but it did not melt the line. Then the tubing just fell off. I must be missing something here.

Rick