FIVE GALLON POURING CENTER

[machiningfool]

I recieved the urethane for making my molds for the viaduct in five gallon cans and they weigh about 40 lbs., so because the urethane has to be transferred to one gal. containers, I thought I would make a device to make it easier to pour. The urethane pours slowly and since I have a bad back, this contraption will make it easier to pour. It is just a hanger for the can to take most of the weight off of it while pouring. The hole in the top is made to allow to reach down and grab the handle of the five gal. can and be able to slip the pipe through the handle of the can for pouring. This way I will have to only lift one side of the container instead of having to hold up the entire weight of 40 lbs. Here are some pictures, Bob.