Printable View
This version of the flip up tool holder is designed for the small 250-001 QCTP tool holders.
They are for a 6 to 9 inch lathe which is what I have.
This is not my design I found it online at:
https://journeymans-workshop.uk/flipupth.php
This is an excellent write up on the build and use of the tool.
The difference in the one I made is the dimensions are not in metric and the size of the tool
has been adjusted to fit the smaller lathes.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Flip Up Tool Holder to our Metalworking category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-flip-up-tool-holder-2"> <img src="/uploads/272112/homemade-flip-up-tool-holder-2.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-flip-up-tool-holder-2">Flip Up Tool Holder</a> <span> by <a href="https://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/threading'>threading</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->