Grinder Stand

[jackhoying]

Not really a tool, but a tool accessory. I refurbished a Baldor 500 grinder and needed a stand for it. On my scrap pile was 36" x 8" x 4", 1/4" wall box tube. I also had some 2", 1/4" wall box for the "legs". I capped the ends with 2" angle iron, which were welded on so they would be 1/8" below the rest of the stand. A 1/4" plate was welded to the top for the grinder mount. After paint, I had some vinyl lettering made to finish it off. It's quite heavy, and rock solid.





Jack
Fort Loramie, Ohio