Guitar neck holder

[Captainleeward]

Guitar neck holder. Made from wood. 4x4 post 2x4 bottom mouse pad base towel cushion.
I hope my wife won't miss that towel......ugh

[Christophe Mineau]

Yes, well done Captain, you'll just have to play here a nice serenade with your refretted guitar, and it will be forgiven !

[rossbotics]

Yea either play her a song or take her to dinner, and she'll forget all about that old green towel, LOL

[Captainleeward]

Hello Christophe, Doug I had a feeling you would be chiming in on this one. Yes I have decided to level my Fender acoustic fret board as some of the frets are in need of
crowning so I have been buying lathier tools to do the job wish me good luck...I will be starting on a old tree trunk from yesteryear to get some practice first .

[Christophe Mineau]

Hi Captain,
I'm sure you will success, just take care of a few things,
- don't forget that with string tension removed, the neck is "normally' back bowed
- don't try to absolutely flatten it with truss rod tension
- Do not force, if you feel some difficulty loosening the truss rod nut.
- Do that only if you know how to set up the truss rod tensioned
- You can however, if you don't want to play with the truss rod setup, check for uneven frets , using a 'rocking tool' (look at stew Mac, but do it yourself)
- When crowning, paint the top with a sharpy and be sure you always leave a thin line on top when filing
- take care that your file is smooth or protected on the side, not to hurt the rosewood.

about leveling, have a look at this site, no special tools used, and good method
Home

Good luck, but I'm confident !

[Captainleeward]

Wow Christophe, How nice to have friends half way around the world who take the time to help you out Thanks a lot buddy. you make me smile

[DIYer]

Thanks Captainleeward! We've added your Guitar Neck Holder to our Miscellaneous category,
as well as to your builder page: Captainleeward's Homemade Tools. Your receipt:

Guitar Neck Holder by Captainleeward

tags: holder, guitar