Hammer With Replaceable Faces

User Tag List

Results 1 to 10 of 16

Threaded View

Jan 18, 2018, 06:46 AM #1

jjr2001

Supporting Member

Join Date

Jun 2016

Posts

960

Thanks

1,194

Thanked 2,337 Times in 623 Posts

jjr2001's Tools

Awards Showcase

Total Awards: 10

Hammer With Replaceable Faces

I just had to make one of these. Steel, Aluminum, Brass, and plastic.
The plastic is polycarbonate and will be replaced with UHMW when my stock arrives.
The handle has an internal cavity for storing a punch. It is made of 304 stainless.
The handle is fluted not knurled like most. The end cap is brass and I think I used
5/16-18 thread for it. The head weighs 10 ounces with the brass faces.

The head is turned form 1" steel and the handle is made from 5/8" 304 stainless.
The head is 2" long and the faces are 3/4" long.
The handle is 9.750 long including the end cap.

I used 3/8-16 all thread for the threaded studs that retain the faces.
The head is threaded onto the handle and can also be replaced if needed and
is threaded 3/8-16 also. Still need to polish out the flutes.

Cheers, JR

Attached Thumbnails

300+ new builds daily: cars, trucks, bikes, fabrication → BuildThreads.com

Last edited by jjr2001; Jan 18, 2018 at 06:51 AM.

Reply With Quote
The Following 13 Users Say Thank You to jjr2001 For This Useful Post:

baja (Feb 28, 2020), Big-Pete (Feb 28, 2020), Jon (Jan 18, 2018), LMMasterMariner (Jan 18, 2018), mklotz (Jan 18, 2018), NickP (Jan 19, 2018), NortonDommi (Jan 19, 2018), Paul Jones (Jan 18, 2018), PJs (Jan 19, 2018), Ralphxyz (Jun 3, 2024), Saxon Violence (Jan 20, 2018), Seedtick (Jan 18, 2018), Tule (Feb 28, 2020)