Holding thread wires

[mklotz]

It seems one must be descended from the genus Octopus to hold everything when
making three wire measurements of the pitch diameter of a thread. Like most
amateurs, I use children's modeling clay to manage the wires. I've tried a
blob of it stuck on the mike frame and a blob on the surface gage sitting on
the cross-slide and adjusted to the height of the thread. Both sort of work
but not very well.

My latest bodge has been more successful. Get a bolt of the same size as the
thread you're cutting. Secure the wires to this bolt using the modeling clay
to hold them in position. Now the wires will be in exactly the configuration
you need for measuring the thread you're cutting.

Of course, if you're cutting a thread for which no matching bolt exists (e.g.,
cutting a fine thread on a camera lens filter holder), this won't work and
you'll have to work out your own bodge.