Printable View
I made this part off tool holder after winning a kennametal part off tool on ebay. I started with a chunk of 2"x1-3/4 4041 and machined the dovetail, the recess for the part off tool instelf and 3 holes for the cap screws to tighten it down. I parkerized it to help it from rusting.
This is my favorite part off tool and holder.
-Whoa! Nice job! Did you bead-blast it before parkerizing? Darned nice machining and surface!
I can't remember to be honest but it is very likely I did. Thank you for the nice compliment.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks 737mechanic! We've added your Part Off Tool Holder to our Machining category,
as well as to your builder page: 737mechanic's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-part-off-tool-holder"> <img src="/uploads/224916/homemade-part-off-tool-holder.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-part-off-tool-holder">Part Off Tool Holder</a> <span> by <a href="http://www.homemadetools.net/builder/737mechanic_2">737mechanic</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/tool-holder'>tool holder</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thank you.
Congrats. I use a similar Sandvik parting tool with an adapter like you built. Parting is no longer such sweet sorrow, but rather actually quite pleasant...