The molten aluminum and manufactured workpiece diameter 100 mm. Also found motor for milling 350W 2000 rpm/
Attachment 8498
Printable View
The molten aluminum and manufactured workpiece diameter 100 mm. Also found motor for milling 350W 2000 rpm/
Attachment 8498
Installed motor
Attachment 8523
Attachment 8524
Vertical rack for milling.
Attachment 8552
Attachment 8553
Attachment 8554
Attachment 8555
Attachment 8556
Attachment 8557
Installed milling attachment
Attachment 8578
Hi. Fully developed a new design, new motor and set it on the right. Gear box broke, it was made of cast iron rather than steel. So now a spindle and pulley.
Attachment 8692
Attachment 8693
Attachment 8694
Box with electronics.
Attachment 8695
Attachment 8696
Today started first milling. Milling platform caliper, later to be installed vise.
Attachment 8796
Homemade milling vise
Attachment 8984 Attachment 8985 Attachment 8986 Attachment 8987 Attachment 8988 Attachment 8989 Attachment 8990
Rotating tailstock centre
Attachment 9070Attachment 9071Attachment 9072
The maximum length of 30 cm details
Thanks Vyacheslav.Nevolya! We've added your Tap Holder to our Tapping and Threading category, as well as to your builder page: Vyacheslav.Nevolya's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/tap-holder-5"><img src="http://www.homemadetools.net/uploads/144651/tap-holder-5.jpeg" /></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/tap-holder-5">Tap Holder</a> <span> by <a href="/builder/Vyacheslav.Nevolya">Vyacheslav.Nevolya</a></span> </div> <div class="tags">tags: <a href="http://www.homemadetools.net/tag/tapping">tapping</a>, <a href="http://www.homemadetools.net/tag/holder">holder</a></div> </div> </div> </div>
Hi Vyacheslav
I do like your Homemade Tap Holder.
Thank you for sharing it with us.
Brendon
Bought rods of hydraulic cylinders and set them on the caliper. These rods hardened, polished and coated with chrome. So I enlarge stiffness lathe machine. Also set the plate so that metal shavings do not pollute the screw. Weather is warm, so I can start painting.
Attachment 9269 Attachment 9270
Later will produce limb and scale. I do not have indexing head, now thinking of how to make the scale. Who can give an idea?
Attachment 9271
Great tutorial thank you
Replaced all rods on a lathe. The rigidity of the lathe is much better.
Attachment 9501
Milling equipment in the work
https://www.youtube.com/watch?v=xq8TC6yDpH8
A plywood blade for a circular saw has 100 teeth. That would give you 100 graduations.
This is one nice lathe / machining center.
Hola Nevolya, que gran trabajo y "Y HECHO EN CASA" buenos videos, felicitaciones.
Made protect stocks of chips
Attachment 15499 Attachment 15500
great job.
Modernization tailstock. I have a rotating center Morse cone №3. I bought a rod and tube from the hydraulic cylinder of agricultural machinery. It should be drilled and carved a hole cone.
Attachment 16810 Attachment 16811 Attachment 16812
Made conical hole
Attachment 16949 Attachment 16950
New tailstock completed
Attachment 17285
Milling housing and pinole
Attachment 17286
Attachment 17287
Attachment 17288
Attachment 17289
Attachment 17290
Attachment 17291
Attachment 17292
I like the way you make what you need from what you can find and nothing stops you from getting there.
Set the reverse motor switch. The next step is to create a gearbox, it will allow to cut left and right metric thread (1, 1.25, 1.5, 1.75, 2, 4)
Attachment 17756 Attachment 17757
I've been following this thread from the beginning and I must say you have done an excellent job
New tool holder
https://www.youtube.com/watch?v=QaVirymE9gk
Hello. After several years of pause, work began on the modernization of the metal lathe. Making a new gearbox and headstock. There will be an automatic supply of a support and an opportunity to cut carvings.
Attachment 41242 Attachment 41243 Attachment 41244 Attachment 41245 Attachment 41246 Attachment 41247 Attachment 41248
Nice drill press.
Bearing housings, spindle installation.
Attachment 41338 Attachment 41339 Attachment 41340 Attachment 41341 Attachment 41342 Attachment 41343 Attachment 41344 Attachment 41345 Attachment 41346
Continuation of the project
Attachment 41585 Attachment 41586 Attachment 41587 Attachment 41588 Attachment 41589 Attachment 41590 Attachment 41591 Attachment 41592
