https://www.youtube.com/watch?v=Vv0TpyNK0nE
In this video I show you the plans and CAD-drawings from my homemade milling spindle which can also be downloaded
Printable View
https://www.youtube.com/watch?v=Vv0TpyNK0nE
In this video I show you the plans and CAD-drawings from my homemade milling spindle which can also be downloaded
3D files for my homemade spindle.
Thanks for the drawings. It will be good use!
Nice spindle design!
Thanks for posting!
Dick
I have been searching for a design like this for some time. This could be adapted for use as a milling spindle for a small lathe. I have been using a Unimat cartridge spindle but it is limited in vertical travel to about 1”. I want to at least double that to allow for deeper drilling.
Thanks for the comments! This spindle gives me a vertical travel of aprox. 50mm (2").
Steve,
What machine do you use it with?
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks engineer steve! We've added your Mill Spindle Plans to our Milling category,
as well as to your builder page: engineer steve's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-mill-spindle-plans"> <img src="/uploads/245476/homemade-mill-spindle-plans.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-mill-spindle-plans">Mill Spindle Plans</a> <span> by <a href="https://www.homemadetools.net/builder/engineer+steve">engineer steve</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/mill'>mill</a>, <a href='https://www.homemadetools.net/tag/spindle'>spindle</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Nice work Steve.
I too have very basic bench drill (RECORD) which I inherited, I have made a few mods for milling non ferrous metals with an old XY table. The main limitations were the Jacobs taper chuck mounting and the flimsy tubular column. I replaced the column with a solid one and after removing the chuck drilled and reamed the end to take ¼ end mills. The next problem was being able to lower the head down to the table for rigidity, easily fixed by cutting away part of the belt guard and fitting a stop collar to the column. Then a fine feed was made for the quill together with a quill lock.
I mainly use it for coordinate drilling but a decent quill as your design would improve matters and thanks for the drawings.