LinkBack URL
About LinkBacksHello Guys!
Today I finished my homemade sheet metal brake.
I used a steel corner 120cm with 50mm x 5mm
M20 & M16 threaded rods with nuts
2 adapters 1/2 ''
Ø 26 round tube
Ø 18 hinges
Hello Guys!
Today I finished my homemade sheet metal brake.
I used a steel corner 120cm with 50mm x 5mm
M20 & M16 threaded rods with nuts
2 adapters 1/2 ''
Ø 26 round tube
Ø 18 hinges
baja (Jan 30, 2020), Gregraper33712 (Jan 30, 2020), IAMSatisfied (Jan 29, 2020), john45 (Mar 16, 2020), Jon (Jan 30, 2020), mdhatter3 (May 2, 2023), Midwestern640 (Jan 29, 2020), rossbotics (Jan 30, 2020), Scotsman Hosie (Feb 2, 2020), Slim-123 (Jan 29, 2020)
Very nice brake. From 10:08 - 10:20, you are braking a pan. I am curious how did you bend the ends, without crushing the previously bent sides?
Thanks PowerMk! We've added your Brake to our Brakes and Presses category,
as well as to your builder page: PowerMk's Homemade Tools. Your receipt:
Thank You very much!Originally Posted by DIYer
Thank you !
The bent sides is 3cm so I used a 3cm rectangle tube and 3mm steel flat bar . Stop the video at 10:17 or 18 and you will see it .
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks