Human stabilization drone - GIF

[Frank S]

The obvious question should be how she keeps the belt around her waist and not fall through it since there is no evidence to the diaper strap between her legs.

Another thing is typically the max lift I can find out of a motor with an 8" 200mm prop would be 4KG 7 motors translates to 28 KG. 28 KG 14 KG useable lift would be the max total lift with 7 Clinelifter motors rated for 1800KV with 65-volt batteries but for heavy industrial lifting you need to design with a 4 to 6 to one lift factor.

For lifting a human I would think yuo would want to up that to 8to 10 to 1 For that you could use the T-motor U15L 43 KV with a 25mm shaft 43KV 100 volts at 65 KG max lift, and the human lift rated carbon fiber props 52x 20 " they are 52" diameter of swept area about $1700.00 each just for the props. TO reduce the overall foot print stack 2 motors on top of each other the same as micro drones use 8 motors in 4 pods

Inmo you would need at least a rig such as I described to overcome the rotor downwash and have a reasonable amount of assurance your girlfriend would not die shortly after exiting the helo.