Inflatable rolled truck rescue tool - GIF

Inflatable rolled truck rescue tool.

<video controls autoplay loop>
<source src="https://diqn32j8nouaz.cloudfront.net/inflatable_rolled_truck_rescue_tool.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>


Previously:

https://www.homemadetools.net/forum/...485#post135747
https://www.homemadetools.net/forum/...407#post127286
https://www.homemadetools.net/forum/...722#post167250
https://www.homemadetools.net/forum/...236#post141881
https://www.homemadetools.net/forum/...485#post135747
https://www.homemadetools.net/forum/...963#post125022
https://www.homemadetools.net/forum/...224#post145932
https://www.homemadetools.net/forum/...396#post146624
https://www.homemadetools.net/forum/...256#post109943
https://www.homemadetools.net/forum/...670#post163131
https://www.homemadetools.net/forum/...698#post147858
https://www.homemadetools.net/forum/...136#post138232
https://www.homemadetools.net/forum/...963#post125022

Same idea Rick had for his horizontal bandsaw feed control

Quote:

---

Originally Posted by rgsparber

Once in a while, I must cut very thin stock on my horizontal bandsaw. This requires a low feedrate. Sure I can do this by slowly lowering the arm but it can get tedious. A solution is to have a saw attachment that can be quickly dropped in place to do the task. Here is one such tool.

If you are interested, please see

https://rick.sparber.org/PneumaticFeedrateControl.pdf

Thanks,

Rick

---