Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 3 of 3

Thread: A knee helper

  1. #1
    Supporting Member tonyfoale's Avatar
    Join Date
    Nov 2016
    Location
    Spain
    Posts
    1,549
    Thanks
    679
    Thanked 2,628 Times in 705 Posts

    tonyfoale's Tools

    A knee helper

    This is quickie. The knee and the slides etc that it supports on a knee mill is very heavy. The effort required for manual or motor powered movement is considerable. A while back I converted my Bridgeport to motorised knee movement and while I was at it I decided to give the motor an easier time by relieving some of the weight. I had a few of those tailgate pneumatic springs fitted to many cars. I tend to save things like that when I'm done with a car. I put two on each side of the mill centred around the lift screw.

    A knee helper-mill-helper.jpg

    Four of these spring units relieve much of the weight of the knee. This has several benefits in addition to the obvious one of making it easier to raise the knee, it reduces wear on the lift screw and nut, but it also relieves load on the slides. The ratio between benefit and effort is quite high.

    186 More Best Homemade Tools eBook

  2. The Following 3 Users Say Thank You to tonyfoale For This Useful Post:

    Frank S (Dec 31, 2016), Paul Jones (Jan 6, 2017), Toolmaker51 (Jan 6, 2017)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks tonyfoale! We've added your Knee Mill Support to our Machining category,
    as well as to your builder page: tonyfoale's Homemade Tools. Your receipt:




    2000 Tool Plans

  4. #3
    Supporting Member tonyfoale's Avatar
    Join Date
    Nov 2016
    Location
    Spain
    Posts
    1,549
    Thanks
    679
    Thanked 2,628 Times in 705 Posts

    tonyfoale's Tools
    Here are other approaches to the same end. I was unaware that several commercial machines were factory fitted.
    Improve CNC Machine Performance With a Z-Axis Counterbalance - CNCCookbook CNCCookbook



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •