Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 6 of 6

Thread: Lathe soft jaws, money saver

  1. #1
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,062 Times in 406 Posts

    thehomeengineer's Tools

    Lathe soft jaws, money saver

    Soft jaws are not cheap so this is a hack can save a lot of money in replacing old machined out jaws. This set up also allows for the jaws to be kept if a repeat job comes up again and again. Also you can custom make the jaw lenghth to suit the work piece (within reason). I have also setup the chuck on the mill and bored a set with a known offset to produce several cams which I wanted to all be the same.
    This may be useful if you use soft jaws alot. Link to website and photos.
    Practical Engineering

    186 More Best Homemade Tools eBook

  2. The Following 4 Users Say Thank You to thehomeengineer For This Useful Post:

    benkeller3 (Dec 11, 2017), mklotz (Dec 11, 2017), olderdan (Dec 12, 2017), Paul Jones (Dec 11, 2017)

  3. #2
    Banned
    Join Date
    Jul 2016
    Posts
    23
    Thanks
    18
    Thanked 1 Time in 1 Post
    I like the hexagonal sacrificial jaws shown here but I have questions about the linked information.

    "The standard soft jaws machined to take the bolt on hexagon sacrificial jaw" is a caption from a photo at the link.

    It looks, to me, like the "standard soft jaws" are one piece jaws that also engage the scroll. I can't see where a soft top jaw is attached to a hard master jaw, as I would expect. Are there fasteners hidden from view in that pic? What am I missing?

    Are the "standard soft jaws" custom made to fit that Pratt chuck or are they commercially available?

    Are those "standard soft jaws" made of steel?

    I've never seen a "soft jaw" that REPLACE the standard (hard) jaw in a factory chuck.

    I'm used to seeing hard master jaws on the chuck with removable soft or hard top jaws.

    What size (diameter) is that chuck?

    Please clarify what's going on with that chuck.

    2000 Tool Plans

  4. #3
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,062 Times in 406 Posts

    thehomeengineer's Tools
    Hi Extropic
    I am guessing you are based in the US?
    In the UK manual lathe chucks come with two sets of hard jaws with the scroll machined into the back of them, so to change from internal to external jaws the complete set of jaws are removed and replaced with the second set (in the correct order to ensure the chuck runs true). So in the case of the soft jaws they are also one piece steel construction and just replace the standard jaws. These are then machined as required but this can get very expensive. So I adopted the US style of master jaw so I could bolt my own jaws to the chuck. The nice thing is you can make the sacrificial jaws out of any materail to suit your aplication ie aluminium, steel, plastic etc.
    I beleive the US prefere internal, external jaws which bolt to a master plate with the scroll machined into the back and the jaws bolted to the front?
    I hope this has answered your questions if not please send another email
    The Home Engineer

  5. The Following User Says Thank You to thehomeengineer For This Useful Post:

    Paul Jones (Dec 13, 2017)

  6. #4
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,062 Times in 406 Posts

    thehomeengineer's Tools
    Lathe soft jaws, money saver-soft-jaws.jpg
    Photo of a set of new soft jaws

  7. #5
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks thehomeengineer! We've added your Soft Jaws to our Lathe Accessories category,
    as well as to your builder page: thehomeengineer's Homemade Tools. Your receipt:




  8. #6
    Banned
    Join Date
    Jul 2016
    Posts
    23
    Thanks
    18
    Thanked 1 Time in 1 Post
    Yes, I'm in the USA and, thanks to your reply, I understand now.

    I wasn't aware of "soft" replacement jaws being a factory option.

    Nice job, all around.



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •