-
8 Attachment(s)
Made a 350mm Disc sander
I thought that a disc sander would be a useful addition to the shed, so bought a 2HP 240V motor off E-Bay (1440RPM), a small sheet of 1/2" ply and an off cut of 3mm metal sheet. Went out and bought a really old basic wood lathe just for the parts ($15) as it had a couple of small face plates and then cut up the frame and threw the rest out apart from the motor.
Cut the sheet of ply into 2 circles of 350mm and glued them together. Coated the ply with Polyurethane to seal the ply. Bolted the faceplate to it and then machined it on the metal lathe to a perfect circular disc and also the front face to make it flat, re-coated the front face with polyurethane. Then went on to build a dust extraction frame and another frame holding the table.
Full build details are located at:
Made a 350mm Disc Sander | MIG Welding Forum
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Ed.! We've added your Disc Sander to our Disc Sanders category,
as well as to your builder page: Ed.'s Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/homemade-disc-sander-30">
<img src="/uploads/159845/homemade-disc-sander-30.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/homemade-disc-sander-30">Disc Sander</a>
<span> by <a href="http://www.homemadetools.net/builder/Ed._3">Ed.</a></span>
</div>
<div class="tags">tags:
<a href='http://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='http://www.homemadetools.net/tag/disc-sander'>disc sander</a>, <a href='http://www.homemadetools.net/tag/motor'>motor</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->