MAKING A MAGNETIC GATE LATCH.
Links to some of my plans:
https://www.homemadetools.net/forum/...965#post105972 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
If you had hinges at both ends, you could mount the magnet assembly on the door and it would fold flat. Then you would n't run the outside chance of dinging your leg against the thing sticking out of the wall.
And you could paint the steel plate you mounted to the wall, or even plaster over it.
That was my wife's reaction. I showed it to her.
There are currently 1 users browsing this thread. (0 members and 1 guests)