MAKING WELDING TOOL WITH RARE FILLER METAL 😀

[orioncons36]

MAKING WELDING TOOL WITH RARE(SECRETE FILLER METAL)

[tlnixon]

In my part-time gig as an Auctioneer, I see a lot of stuff.
at a recent auction I bought nearly an identical hammer only difference is they used the handle of an old ratchet or 3/8 breaker bar for a handle. I thought it was just too cool to pass up.

[orioncons36]

YES, I WOUD HAVE A HARD TIME PASSING IT UP TOO!!👍

[orioncons36]

Sounds like a good looking hammer.

[mbshop]

What is rare filler metal ? I have two welding hammers with coil handles.

[sossol]

What is rare filler metal ? I have two welding hammers with coil handles.

I suspect that OP was using the term tongue-in-cheek. He used a drill bit as a filler rod to give the pointy bits a harder surface. Such a material is rare in the sense that it is not common in welding rod form.

Jodi Collier of weldmonger.com did a video about this recently. It's a genius idea.


Neil

[orioncons36]

JUST AN ORDINARY DULL DRILL BIT.

[orioncons36]

AN ORDINARY DULL DRILL BIT.

[orioncons36]

Its just an old dull drill bit.