Mater Slave Circuit Diagram for 2 and 3 Phase Extension

Master slave switch using Kemo M103N module

When an extension is required, the question often arises as to how I can connect my machines so that not everything has to be switched on and off manually. I have now built myself an extension cable for 3 phase supply with a maximum of 16A with a Kemo M103N master slave switch. The power is supplied via a 5-pin CEE plug with 16A. A 16A CEE socket outlet and a Schuko socket outlet are available independently for the switching function, with which the slave socket outlet is supplied. Two further 2-phase sockets are connectet for direct supply. A box is required in which the sockets and the switch can be installed. The extension cable is connected directly.

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks 2gsg2_muc! We've added your Extension Controller Circuit to our Electrical category,
as well as to your builder page: 2gsg2_muc's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-extension-controller-circuit"> <img src="/uploads/269072/homemade-extension-controller-circuit.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-extension-controller-circuit">Extension Controller Circuit</a> <span> by <a href="https://www.homemadetools.net/builder/2gsg2_muc">2gsg2_muc</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/power-supply'>power supply</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->