New: BuildThreads.com - 300+ build posts/day (with photos)
nova_robotics (Apr 15, 2024)
I find myself needing to locate a gooseneck puch die set with 7 inch height 3/4" tip face 10 feet in length for a 250 ton press to air bend 3/8" gr572 material
Never try to tell me it can't be done
When I have to paint I use KBS products
Should be plenty of those.
Stupid is forever, ignorance can be fixed.
More like finding apples growing on a pear tree. than you might think. Lots of 3.5 and fewer 5" nut most 7s are made for sheet metal only capable of 16 ga with 1/4" tip face. Sure made to fit even a 300-ton press break the thin bodies and small tip face means it would fold like tissue paper trying to bend 3/8 thick material.Originally Posted by Floradawg
Never try to tell me it can't be done
When I have to paint I use KBS products
I thought that was a fictitious item. I thought I was making a joke.
Stupid is forever, ignorance can be fixed.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks