https://youtu.be/2kQyXqVwYDs
Printable View
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks machining 4 all! We've added your Mini Metal Bender to our Metalworking category,
as well as to your builder page: machining 4 all's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-mini-metal-bender"> <img src="/uploads/248182/homemade-mini-metal-bender.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-mini-metal-bender">Mini Metal Bender</a> <span> by <a href="https://www.homemadetools.net/builder/machining+4+all">machining 4 all</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/bender'>bender</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
With this mini metal bender, so far I have been able to bend plates with a thickness of 2.0 mm no more than that ... So, I recommend it for work with thin plates! :D
Any chance of getting plans with dimensions for this ?
Yes, if you can wait a while, I can prepare drawings for the end of this week! Thank you for your interest mdhatter3!
Hello mdhatter3! Sorry for the delay in sending this drawing, I was quite busy. If you have any questions, send me your message. I hope I helped, M4A!
Attachment 39043