Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 9 of 9

Thread: Mini plate compactor for sandstone slabs

  1. #1
    olefella's Avatar
    Join Date
    May 2019
    Posts
    18
    Thanks
    10
    Thanked 75 Times in 11 Posts

    olefella's Tools

    Mini plate compactor for sandstone slabs

    Sandstone slabs are heavy and difficult to tamp to an even surface. A commercial plate compactor/vibrator is too heavy, damages the pavers and can crack them. This is a mini-compacter, made out of scrap I had in the antique department, weighs 30kg with a 1/4HP motor. Works well, cost nothing.


    186 More Best Homemade Tools eBook
    Last edited by olefella; Apr 20, 2020 at 05:55 AM.

  2. The Following 15 Users Say Thank You to olefella For This Useful Post:

    AKpapa (Apr 27, 2020), Altair (Apr 20, 2020), baja (Apr 22, 2020), bobs409 (Apr 22, 2020), Drew1966 (Apr 26, 2020), EnginePaul (Apr 23, 2020), high-side (Apr 22, 2020), Inner (Apr 21, 2020), Jon (Apr 21, 2020), mwmkravchenko (Apr 21, 2020), rlm98253 (Apr 21, 2020), Scotty12 (Apr 21, 2020), Scrounga (Apr 21, 2020), sossol (Sep 20, 2023), Tooler2 (Apr 22, 2020)

  3. #2
    Content Editor
    Supporting Member
    Altair's Avatar
    Join Date
    Aug 2013
    Posts
    11,727
    Thanks
    1,353
    Thanked 29,258 Times in 9,724 Posts


    Thanks olefella! We've added your Mini Plate Compactor to our Miscellaneous category,
    as well as to your builder page: olefella's Homemade Tools. Your receipt:




    2000 Tool Plans

  4. #3
    Supporting Member
    Join Date
    Jul 2019
    Posts
    122
    Thanks
    10
    Thanked 67 Times in 41 Posts
    Mate, it doesn’t get any better than that. Works well+cost nothing=
    The only problem now is keeping it because when your mates find out you have one......you know the rest.

  5. The Following User Says Thank You to Scrounga For This Useful Post:

    rdarrylb (Apr 22, 2020)

  6. #4
    olefella's Avatar
    Join Date
    May 2019
    Posts
    18
    Thanks
    10
    Thanked 75 Times in 11 Posts

    olefella's Tools
    You're not wrong Scrounga - one mate's already searching around for a compactor to do his path and I'm trying to avoid him. Never works!

  7. The Following 2 Users Say Thank You to olefella For This Useful Post:

    bobs409 (Apr 22, 2020), rdarrylb (Apr 22, 2020)

  8. #5
    Supporting Member
    Join Date
    Nov 2019
    Posts
    29
    Thanks
    448
    Thanked 3 Times in 2 Posts
    Great idea! I need one to compact some sand in my barn that the bloody groundhogs tunnel through, and I don't want to spend $500 for one that I wouldn't use much. Never thought about an eccentric weight as the vibratory source. I had thought of a crank to an isolated bottom plate. Your idea is much simpler. I will be saving this for a future build!!!

  9. #6
    Supporting Member
    Join Date
    Feb 2015
    Posts
    112
    Thanks
    2
    Thanked 24 Times in 18 Posts
    You shouldn't have to tamp the slabs if you've properly compacted the base. It's the whole point of having laid base-to provide a solid, stable surface to lay your paving on.

  10. #7
    Supporting Member Drew1966's Avatar
    Join Date
    Oct 2016
    Posts
    457
    Thanks
    517
    Thanked 144 Times in 89 Posts
    Very nice. Why use Western Red Cedar as it’s worth over $100/metre? Cheapo pine would do the same job.

  11. #8
    Supporting Member metric_taper's Avatar
    Join Date
    Mar 2017
    Location
    Marion, Iowa
    Posts
    585
    Thanks
    227
    Thanked 256 Times in 153 Posts

    metric_taper's Tools
    Your build is very interesting. I'm wondering, if you had a bit more offset weight on your rotating shaft, if it would momentarily jump in the air, allowing the operator to move it easier sideways. I'm in need of this same sort of machine for a garage slab foundation prep. I'm working right now.

  12. #9
    olefella's Avatar
    Join Date
    May 2019
    Posts
    18
    Thanks
    10
    Thanked 75 Times in 11 Posts

    olefella's Tools
    Quote Originally Posted by Pa1963 View Post
    You shouldn't have to tamp the slabs if you've properly compacted the base. It's the whole point of having laid base-to provide a solid, stable surface to lay your paving on.

    The slabs vary in thickness from 28-35 mm, and, while the undersurface is saw cut some have flakes broken off so it’s not always even. The base is compacted FCR, and I have brushed off all largish chips so it’s pretty flat and stable. There’s a layer of sharp sand under the slabs allowing them to settle so their top surface is even. I started off tamping them with a rubber mallet but they need a bit more hence the vibrater. I’ve laid smooth concrete slabs before, but not sandstone, so maybe I’ve got something wrong, but this seems to be going ok now.



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •