Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 5 of 5

Thread: motorcycle lift table plans and help and suggestions

  1. #1

    Join Date
    Jul 2015
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    motorcycle lift table plans and help and suggestions

    Request help in plans for making in expensive motorcycle lift table due to bad knees and back

    186 More Best Homemade Tools eBook

  2. #2

    Join Date
    Dec 2014
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Bike lift

    I've been considering the same project. My main concerns are bike stability and cost. I also have very little space for storage when not in use. My first thought is to ride onto a lowered platform and put front wheel into a chocking device. I'm older and want to work from a stool so I do t need to go up 30" like commercial lifts. I can lift one end at a time then set a jack stand device. Some wood is OK but pivots, bearings and locks need to be metal I think.I've looked at a lot of designs online. I always start my projects with lists of desires, concerns, limitations, ideas I've seen, and items I want to avoid. Keep a log or tablet and add things as they come up. Make sketches, quantify dimensions, loads, and geometry parameters. Get some pricing on materials you think you might use. I frequent salvage yards, yard sales and street side discard piles. Repurposing stuff keeps some costs down but can increase other costs or complicate design.
    Good luck,
    Gene

    2000 Tool Plans
    Last edited by culveres; Aug 6, 2015 at 08:23 PM. Reason: Spell check issue

  3. #3

    Join Date
    Aug 2015
    Posts
    4
    Thanks
    8
    Thanked 0 Times in 0 Posts
    I looked at one, then built it out of angle iron angle and used a inexpensive 12v winch to lift and lower.

  4. #4
    ecm_this's Avatar
    Join Date
    Feb 2014
    Posts
    5
    Thanks
    0
    Thanked 3 Times in 2 Posts

    ecm_this's Tools
    I used these, and modified it to use a HF air over hydraulic cylinder. Works like a champ.
    ekoinstal.com/skutery/Inne%2520AFAB_Motorcycle_Table_Lift_Plans
    Add the w's where they belong.
    Last edited by ecm_this; Aug 21, 2015 at 01:53 PM.

  5. #5

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •