Near miss from demolition debris - GIF

Near miss from demolition debris.

<video controls autoplay loop> <source src="https://s3-us-west-1.amazonaws.com/hmt-forum/near_miss_demolition_debris.mp4" type="video/mp4"> Your browser does not support the video tag. </video>


Previously:

https://www.homemadetools.net/forum/...511#post135863
https://www.homemadetools.net/forum/...714#post123860
https://www.homemadetools.net/forum/...244#post121476
https://www.homemadetools.net/forum/...119#post115591
https://www.homemadetools.net/forum/...006#post149152

Ages ago I worked with a landlord renovating his buildings (he bought remuddled buildings and returned them to their original appearance). We were removing the stucco fascade from an 1850s apartment building. I'd cut the concrete in squares with a hammer and chisel (it was easier than heaving a machine tool), cutting or tearing the metal lathe, then tossing the chunks to the ground. This stuff was ~1 1/2" thick.
One day we were working at the second floor level on the scaffold. We're both the sort who tend to see how far we can push our luck, and we were cutting bigger and bigger chunks. We lost our grip on a roughly 2'x2' chunk. We both grabbed at it, but only managed to impart a forward rotation to it. It hit the porch in a spin, rolled off the porch, down a 4' tall ~45* bank, across the sidewalk, curb and a few feet of the street. We both stared, dumbfounded as it rolled toward my car, getting smaller and smaller. By the time it reached my car it was only about 4" round and it fell over harmlessly.
We had a good laugh at what happened and our deer-in-headlights reaction, then decided to stick with smaller chunks.

It would have been youtube gold if youtube and camera phones had existed.

Neil

Are those bricks?

Quote:

---

Originally Posted by sossol

Ages ago I worked with a landlord renovating his buildings (he bought remuddled buildings and returned them to their original appearance). We were removing the stucco fascade from an 1850s apartment building. I'd cut the concrete in squares with a hammer and chisel (it was easier than heaving a machine tool), cutting or tearing the metal lathe, then tossing the chunks to the ground. This stuff was ~1 1/2" thick.
One day we were working at the second floor level on the scaffold. We're both the sort who tend to see how far we can push our luck, and we were cutting bigger and bigger chunks. We lost our grip on a roughly 2'x2' chunk. We both grabbed at it, but only managed to impart a forward rotation to it. It hit the porch in a spin, rolled off the porch, down a 4' tall ~45* bank, across the sidewalk, curb and a few feet of the street. We both stared, dumbfounded as it rolled toward my car, getting smaller and smaller. By the time it reached my car it was only about 4" round and it fell over harmlessly.
We had a good laugh at what happened and our deer-in-headlights reaction, then decided to stick with smaller chunks.

It would have been youtube gold if youtube and camera phones had existed.

Neil

---

I love free lessons on what not to do.

Quote:

---

Originally Posted by baja

I love free lessons on what not to do.

---

:lol::clapping: