New handle

Printable View

Dec 30, 2016, 07:17 PM
frugalolegeezer

2 Attachment(s)

New handle

Had this old hatchet laying around the shop and decided it needed a new handle. The tang on the hatchet was steel so I cut out a few leather washers and also some washers cut from the bottom of a white plastic bucket. Brass washers were used for the ends. Ground off the rough edges and smoothed out and polished the handle and another project finished. More ideas tumbling around in this ole head, gotta get back to work.Attachment 15725 Attachment 15726
Dec 30, 2016, 09:24 PM
C-Bag

Love it. I remember those kinds of handles on hatchets when I was a kid. Never see them anymore. I've got a couple of hi end dead blow hammers that plastic handles have started shattering and rather than toss them I've been trying to figure out how to put new handles on them. So what's the final finish? Like polyurethane?
Dec 31, 2016, 06:05 PM
frugalolegeezer

Hey Paul
The best thing I have found for finishing handles of wood or leather and sometimes I will use this even on metal to keep it from tarnishing is rust-oleum crystal clear enamel. Absolutely the best finish I have found. I have tried varnish, polyurethane and just do not have good luck with them. This enamel dries to the touch in just a few minutes and I really like it. Good luck and thanks for the interest.
Jan 2, 2017, 09:49 AM
PJs

Nice Job Frugalolegeezer! I like your mindset and that is a nice old shingler's hatchet I believe. Curious of the brand...couldn't read it from the photo. Most impressed with making your own leather stack with the bucket spacers!! Bravo on that. The knife maker guys have various stacker leathers for fairly cheap and cheerful. Here are a couple of links: KnifeKits, and Twin Leather Co.

I restored my dads old hunting knife a while back and was able to save the leather with some light sanding and used enamel as you did. It felt like the leather liked it more than a varnish I spot tested with so that's what I used. Still have to build a new sheath for it but kind of hate to because dad had engraved his initials in it...but it's in bad shape on the inside.

Great Job bringing the old hatchet back to life. Thanks for sharing! ~PJ
Jan 2, 2017, 10:16 AM
C-Bag

Fabulous links Wiz! Especially Twin Leather, they have tutorials and are half the price of the other, plus many different patterns. It makes sense once you see it but I would never known it was called a stacked washer handle.

Thanks frugalolgeezer and PJs for the info. Wonder why enamel works the best? Another of those mysteries?
Jan 4, 2017, 07:44 AM
DIYer


Thanks frugalolegeezer! We've added your Hatchet Handle to our Woodworking category,
as well as to your builder page: frugalolegeezer's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-hatchet-handle"> <img src="/uploads/163257/homemade-hatchet-handle.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-hatchet-handle">Hatchet Handle</a> <span> by <a href="http://www.homemadetools.net/builder/frugalolegeezer">frugalolegeezer</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/handle'>handle</a> </div> </div> </div> </div>
Jan 4, 2017, 01:52 PM
blkadder

I love the look of the handle. It reminds me of the handle on my old KABAR. Thanks for posting.
Jan 5, 2017, 12:24 AM
Paul Jones

frugalolegeezer,

Thank you for the tip about Rust-oleum crystal clear enamel. I use the spray can version for parts I machine from brass and want to keep the bright polished brass appearance. The finish lasts for years and looks as good as the day the parts we machined.

Paul
Jan 12, 2018, 08:55 AM
AvaChava

Finally, a solution!

Quote:

Originally Posted by frugalolegeezer

Had this old hatchet laying around the shop and decided it needed a new handle. The tang on the hatchet was steel so I cut out a few leather washers and also some washers cut from the bottom of a white plastic bucket. Brass washers were used for the ends. Ground off the rough edges and smoothed out and polished the handle and another project finished. More ideas tumbling around in this ole head, gotta get back to work.

I have almost an identical carpenter's hatchet that the handle rotted off years ago. I never suspected it was possible to replace the once beautiful handle with pieces as the handle shank is ribbed/flat. Now that I'm retired I have time to find the parts and give this loyal hatchet a fitting grip.

Thanks so much for the inspiration!:hattip:
Jan 12, 2018, 08:56 AM
AvaChava

Thanks to PJs also for the links!
Feb 14, 2020, 06:13 AM
baja

Quote:

Originally Posted by C-Bag

Love it. I remember those kinds of handles on hatchets when I was a kid. Never see them anymore. I've got a couple of hi end dead blow hammers that plastic handles have started shattering and rather than toss them I've been trying to figure out how to put new handles on them. So what's the final finish? Like polyurethane?

I have a Matco deadblow hammer I found on a four wheel drive trail a few years ago and had the same problem. I had purchased a product called Fiberfix (I think) and never used it until last week. I saved the pieces that broke off and stuck them back on and wrapped the handle with it. Worked like a charm and has the added advantage of a better grip.
Feb 14, 2020, 06:18 PM
frugalolegeezer

Leather handle

Quote:

Originally Posted by baja

I have a Matco deadblow hammer I found on a four wheel drive trail a few years ago and had the same problem. I had purchased a product called Fiberfix (I think) and never used it until last week. I saved the pieces that broke off and stuck them back on and wrapped the handle with it. Worked like a charm and has the added advantage of a better grip.

Hey Baja,
Sorry I did not get back to you sooner, but the finish is nothing but good ole Rustoleum Chrystal clear spray finish. Try it and I think you will like it.
Nov 30, 2022, 11:03 PM
yumastepside

I quite often restore old leather handled axes, knives and hammers...glue between each leather washer, clamp them up, shape the handle when dry and I usually finish them with 50/50 beeswax and mineral oil.

https://i.imgur.com/kqlQvFw.jpg

Roger
Dec 1, 2022, 07:39 PM
tlnixon

I have a hammer-type hatchet that needs a new wooden handle and I can't find one anywhere. Any ideas?
Dec 1, 2022, 08:53 PM
yumastepside

Check lawnmower and chainsaw shops.

Roger
Dec 2, 2022, 01:02 AM
DIYer


Thanks yumastepside! We've added your Axe Handle to our Leathercraft category,
as well as to your builder page: yumastepside's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-axe-handle-4"> <img src="/uploads/257236/homemade-axe-handle-4.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-axe-handle-4">Axe Handle</a> <span> by <a href="https://www.homemadetools.net/builder/yumastepside">yumastepside</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/handle'>handle</a> </div> </div> </div> </div>
Feb 7, 2023, 04:45 AM
NeiljohnUK

My found Estwing hammer needed a new handle, ground the riveted end off and used paracord in place of the rotted shaped leather, I found that more comfortable to use, but if it were a 'nice' hammer I'd probably have gone for leather, nice job btw.