Non-Standard ¼-20 Nuts

What do you do if you need a nut for a ¼-20 bolt but the standard ones are too large? Here is a simple technique that can be applied in other ways too.

If you are interested, please, click here

Your comments are welcome. All of us are smarter than any one of us.

Thanks,

Rick

Since you're retapping the nut, maybe you want to think about using metric nuts, e.g. ...

7/16 in ( standard nut size for 1/4-20) = 0.438" AF
10 mm (standard nut size for 6 x 1) = 0.394" AF

Thanks rgsparber! We've added your Non-Standard Nuts to our Fastening category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-non-standard-nuts"> <img src="/uploads/259809/homemade-non-standard-nuts.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-non-standard-nuts">Non-Standard Nuts</a> <span> by <a href="https://www.homemadetools.net/builder/rgsparber">rgsparber</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/fasteners'>fasteners</a> </div> </div> </div> </div>