Post setting method - GIF

[ToolTalkBot]

Post setting method.




Previously:

Concrete fence post removal tool - video
Hand cranked post puller - GIF
Mini excavator post driving attachment - GIF
Pneumatic post driver - GIF
Post mower and post washer GIFs
Stump and post puller - videos

[bruce.desertrat]

Well, so long as all that suspended-in-midair framing is plumb...

[gatz]

right, doesn't show any fill; how does that work ?

[bob_3000]

right, doesn't show any fill; how does that work ?

He is demonstrating his method of holding and stabilizing the post with one hand, not building a whole deck.

[gatz]

not a good demonstration if not applicable

[bob_3000]

not a good demonstration if not applicable

His method worked perfectly did it not?

[gatz]

Title is Post SETTING method.
How then, is the post SET; it's only located.

[bob_3000]

Title is Post SETTING method. How then, is the post SET; it's only located.

If you have an issue with the title and not the method then maybe just say that.

[hemmjo]

If then have enough structure in place and anchored to support those posts, it is not difficult to put concrete in the hole AFTER hanging the post.

As long as you take the time to work the concrete under most of the post. You may not get full wood to concrete contact, you it is easy to get enough to support the load. One problem with doing it that way it dirt falling into the open home, then not bothering to remove it before the concrete.

The concrete should also NOT fill the hole, only fill in under the post, and a little up the side.