POWDER-COATING on a small scale | tools, hardware, parts, castings etc | video

[Karl_H]

I thought that the electrostatic application of the powder was the key step, but for these parts, the dipping seems to work fine.
Thanks for the tip.

[makin sawdust]

The electrostatic is usually the directed method, however in this application, heat is the key

[high-side]

I thought that the electrostatic application of the powder was the key step, but for these parts, the dipping seems to work fine.
Thanks for the tip.

The process he is using is call 'Hot - Flocking'. You can use this process for materials that have little to no conductivity, and non-metallic materials (such as glass)