Printable View
Power scraper. By Ca Lem. 19:14 video:
https://www.youtube.com/watch?v=_nCGMDBjyH4
Previously:
https://www.homemadetools.net/forum/...129#post157537
https://www.homemadetools.net/forum/...368#post154515
https://www.homemadetools.net/forum/...766#post155997
https://www.homemadetools.net/forum/...989#post156973
Excellent work Sir!
From: Canada
Bob
excellent video with just the right amount of editing! I've actually wondered about the feasibility of modifying a recip saw for scraping and you have demonstrated that it can be done.
Don't really know anything about scraping besides a tiny bit I watched in a video a ways back. What's the benefit of scraping versus using some type of abrasive to take material off?
I don't really know too much but have talked to some old machinists in the past and they all said a good scraper can get flatness down to mircon levels.
It is all about the control, scraping can isolate the high spots.
Do a search on you tube, there are a lot of videos on scraping.