Quick change bandsaw table

**Stevohdee** · May 19, 2021, 02:04 AM

G'day tool users, well I finally got equipped with a bandsaw. I think people are sick of watching my hacksaw antics, hehe. I searched the net for ideas for a quick change table but didn't find any so figured out my own, enjoy
Regards stevoh

Quick change bandsaw table-img_20210519_105534_copy_912x684.jpg

Quick change bandsaw table-img_20210519_105510_copy_912x684.jpg

Quick change bandsaw table-img_20210519_105436_copy_912x684.jpg

**nova_robotics** · May 19, 2021, 08:30 PM

I like it.

The slit in the deck of my bandsaw leads the blade. It's a pain. Burrs off of material catch and stop the material being able to be pushed through. A trailing slit from the blade would solve this.

**sossol** · May 19, 2021, 10:23 PM

The nuts and bolts of the motor mount are different sizes so that you can use a single set of wrenches to adjust them. Most of is here have duplicate tools, but normal people don't.

Neil

**phred** · May 19, 2021, 11:06 PM

an elegant solution, thanks.

**Gadgeteer** · Aug 15, 2022, 01:37 AM

Like so many times in life... the end solution is satisfying, but the journey along the way is even more so. Thanks for the journey!

**carl blum** · Aug 15, 2022, 07:15 AM

Hi Gang:
Here is the table I made for my bandsaw:
https://www.instructables.com/Vertical-Bandsaw-Table/
The bandsaw vise clamps it, so it is quick to set up.
Carl.