Printable View
I recently saw a video where the toolmaker's clamp had a quick-setting feature. It had one clearance hole and one tapped hole reversed in each jaw, and the jaws could be slid apart. This was a feature that I have always wanted and inspired me to make a quick model to test the idea. Unfortunately, the model I copied did not work, so I refined the idea into what you see in the video.
https://youtu.be/nc9qzmwE-K4?si=pNgHCezal-CBjlby
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Mook! We've added your Quick Set Toolmaker's Clamps to our Clamps category,
as well as to your builder page: Mook's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-quick-set-toolmaker-s-clamps"> <img src="/uploads/277169/homemade-quick-set-toolmaker-s-clamps.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-quick-set-toolmaker-s-clamps">Quick Set Toolmaker's Clamps</a> <span> by <a href="https://www.homemadetools.net/builder/Mook">Mook</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/clamp'>clamp</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->