Rebuildind an antique corner bed

[Christophe Mineau]

Hi,
At last I have finished my last project, it was a long lasting one, and was quite of a challenge actually.
But it ended up pretty well.
It's a cherry bed, restored and actually re-built somewhat differently than the original one, in order to better fit with the modern use we will have of this piece of furniture.

I have written a detailed article on my website explaining all the problems I faced and how I solved them.
Translating this article, I just realized that on nearly all the photos of that article, you can see a homemade tool from me you may already know on homemadetools.net.
So this article is a kind of showcase of lots of the tools I have made.

Here are some pictures, but you can read the article at :
La Belle Note - Rebuilding an old corner bed

(In case some of you can not reach my website, please send me a personal message with your IP address, I know that the anti spam filter on the server I use is too much selective)


Before :










After:

[jotasierra]

Magnifica restauración, felicitaciones.