LinkBack URL
About LinkBacksRotary broach. By Artisan Makes. 14:17 video:
Rotary broach. By Artisan Makes. 14:17 video:
New: BuildThreads.com - 300+ build posts/day (with photos)
lassab999 (Mar 17, 2022), mwmkravchenko (Mar 22, 2022), Ralphxyz (Mar 17, 2022), uv8452 (Mar 17, 2022), WmRMeyers (Mar 17, 2022)
 copy it. A real relief for the cutting process is a larger hole. An Allen key transmits the torque only by the edges. A 'complete' hexagon is unnecessary. Therefore drill a ø6.3...6.5 mm bore for an Allen size 6. By the way 'relief': Brass doesn't like to be cut with a blade with steel 'history'. I always keep 2 different saws. "Pin It")
Dear Artisan: Thats a nice and simple solution - I like it and I will (after years of reluctance) copy it. A real relief for the cutting process is a larger hole. An Allen key transmits the torque only by the edges. A 'complete' hexagon is unnecessary. Therefore drill a ø6.3...6.5 mm bore for an Allen size 6. By the way 'relief': Brass doesn't like to be cut with a blade with steel 'history'. I always keep 2 different saws.
Very interesting, this seems to be a much simpler way to build a rotary broach than other designs I’ve seen over the years and appears to work well.
Good job!
When I was young and poor I learnt a trade, and after many years of hard work I’m not young anymore.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks