saber saw keyway cutting

thank you........good idea.....

Quote:

---

Originally Posted by Unkle Fuzzy

My machine shop teacher told me that there no wrong way to do a job. There are better ways, but no such thing as a wrong way.

---

Well the wrong way is when the doer or somebody nearby gets hurt. That being said there are probably 100's of ways to get a job done safely.

Interestingly this just makes me more interested in doing a homemade die filer that can also take blades. Once you have one I suspect that there would be many uses and it would have to be better than the stuff that is marketed as an upside down jig saw.

Quote:

---

Originally Posted by Unkle Fuzzy

My machine shop teacher told me that there no wrong way to do a job. There are better ways, but no such thing as a wrong way.

---

That is true but there are a lot of methods which should not be tried by novices.

Canada Calling!
A win-win.

PS What is you Pres. doing to and why?

Us rip of the richest nation? On what planet?

Bob

QUOTE=Frank S;190704]Totally the wrong tool for the job, but I found myself not having anything small enough to cut a keyway with in a 5/8" bore other than to cut them entirely with a file. I clamped the foot of my saber saw in a vice then used it like a die filer to rough cut the small keyways in several sprockets then finished them off with a file it really saved a lot of arm motion.
Attachment 40865

Attachment 40866

Attachment 40867

Attachment 40868[/QUOTE]