Sawing over 100 bars at once - GIF

Sawing over 100 bars at once.

<video controls autoplay loop>
<source src="https://s3-us-west-1.amazonaws.com/hmt-forum/sawing_over_100_round_bars_at_once.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>


Previously:

https://www.homemadetools.net/forum/...081#post149472
https://www.homemadetools.net/forum/...023#post145073
https://www.homemadetools.net/forum/...596#post155378
https://www.homemadetools.net/forum/...247#post121506
https://www.homemadetools.net/forum/...1408#post74350

136 by rough estimate

I was in a shop that makes bridge beams last week. This is an 18x42" bandsaw.

Attachment 35764

Love to have a couple of those around, just in case I need a a piece! Someone already took a couple out of the top row :)

Attachment 35768

I used to work at a tube mill and we had a band saw that regularly cut full bundles of1/4” wall 4” diameter tube, I want to say it was around 50 pieces. Was pretty cool to watch run. The operator tack welded each tube together on the end not in the massive vice. It chomped through a bundle relatively quick although I can’t remember an exact cycle time, basically just cut abut 10” off each bundle