14 Attachment(s)
Sensitive Drilling Platform with plans
Marv Klotz (mklotz) has an excellent article about drilling with tiny drill bits.
I use these small bits on occasion but not all that often. Tiny Carbide drills are quite brittle and I have been known to break a few!
Here is Marv's Posting: https://www.homemadetools.net/forum/...0287#post91042
After reading Marv's article I wanted to build one for myself and that is what this posting is about.
Complete prints are included for my version of Marv's excellent Sensitive Drilling Table.
The completed drilling table has a throw of about .750" which should be more than enough for most
sensitive drilling. I included a table anti rotation pin and that is the main difference between
my table and Marv's. I did not use ball bearings on the pushrod either. Thanks for the Idea Marv.
