A Sheet Metal Drill Guide (How to Not Drill Your Hand)

I recently needed to drill through two layers of thin aluminum sheet metal that were wrapped around a post. This posed two problems: the drill bit walks across the curved surface and the sheet metal caves in from the force of the drill. These problems would be solved by pushing the drill hard against the surface while backing up the sheet metal with my hand. No, I ain't that stupid.

I built a tool to solve my problem safely.

If you are interested, please, click here.



Your comments are welcome. All of us are smarter than any one of us.


Thanks,

Rick

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks rgsparber! We've added your Sheetmetal Drill Guide to our Drilling and Drill Presses category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-sheetmetal-drill-guide"> <img src="/uploads/250137/homemade-sheetmetal-drill-guide.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-sheetmetal-drill-guide">Sheetmetal Drill Guide</a> <span> by <a href="https://www.homemadetools.net/builder/rgsparber">rgsparber</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/safety'>safety</a>, <a href='https://www.homemadetools.net/tag/holding'>holding</a>, <a href='https://www.homemadetools.net/tag/drilling'>drilling</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Damn thee! Now I don't have an excuse to buy that portable hand held LASER.

I have added a feature to the back of this tool that stops the drill from cutting after it has gone through the sheet metal. The article has been updated.

Rick

The tool has evolved again. It now has a built in clamp to prevent it from sliding around before I hold it steady. The article has been updated.

Rick