LinkBack URL
About LinkBacksShop press punching thick steel.
Previously:
Punch press punching thick steel plate - GIF
Sheetmetal punch and die - GIF
Punching thick steel - GIF
Electro-hydraulic hole punch - GIF
Turret punching machine - GIF
Shop press punching thick steel.
Previously:
Punch press punching thick steel plate - GIF
Sheetmetal punch and die - GIF
Punching thick steel - GIF
Electro-hydraulic hole punch - GIF
Turret punching machine - GIF
mwmkravchenko (Nov 4, 2023), nova_robotics (Nov 4, 2023), Ralphxyz (Nov 4, 2023)
How much pressure to make the punch?
mwmkravchenko (Nov 4, 2023)
Ralph here is a chart for punching holes in mild steelOriginally Posted by Ralphxyz
https://www.americanmachinetools.com...punch_hole.htm
It is never recommended to punch a hole smaller in diameter than the thickness of the steel.
However, I used to regularly punch 3/4" holes in 1" plate by heating it above 600°f in an oven prior to punching
Never try to tell me it can't be done
When I have to paint I use KBS products
mwmkravchenko (Nov 4, 2023), odd one (Nov 4, 2023), verticalmurph (Nov 5, 2023)
HI:
The pressure is the circumference x the thickness x the sheer strength of steel, so guessing at the sizes:
(1" dia x Pi = 3.14 ) x 1/2" thick x 30K psi for steel = 24 tons
Iron workers have very generous punch / die clearance which will drop the tonnage required.
Carl.
mwmkravchenko (Nov 4, 2023), wood_1 (Nov 5, 2023)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks