Shorty scriber

I needed an adjustable scriber that could conveniently work down close to the top of the surface plate. This design is infinitely adjustable and rock steady when locked. Adjustments are made by loosening the lock screw and turning the cylindrical piece that carries the scriber point made from drill rod.

https://s3-us-west-1.amazonaws.com/f...he/36585-1.jpg

The device disassembled... The slot turned in the cylindrical carrier serves two purposes. It prevents the cylinder from falling out when the lock screw is loosened and also prevents burrs raised by the lockscrew from restricting the adjustment of the height of the scriber.

https://s3-us-west-1.amazonaws.com/f...he/36585-2.jpg

Thanks Marv! I've added your Short Scriber to our Scribes, Awls, and Marking Knives category, as well as to your builder page: mklotz's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/short-scriber"><img src="http://www.homemadetools.net/uploads/128234/short-scriber.jpeg" /></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/short-scriber">Short Scriber</a> <span> by <a href="/builder/mklotz_3">mklotz</a></span> </div> <div class="tags">tags: <a href="http://www.homemadetools.net/tag/scribe">scribe</a></div> </div> </div> </div>

Thank you for sharing this nifty tool, Marv. Did you make the lock-screw? If not, where'd you find it?

Many thanks,
Bryan

Quote:

---

Originally Posted by IAMSatisfied

Thank you for sharing this nifty tool, Marv. Did you make the lock-screw? If not, where'd you find it?

---

I found some knurled, stainless thread inserts in my parts cabinet. They're meant to be formed into plastic assemblies to provide metal threads for durability. I Loctited a setscrew with a matching thread partway into one of these inserts and, voila, a classy finger screw.

Look for these inserts at recyclers, etc. They come in different sizes and materials. It's a quick and dirty way to get a nice looking finger screw.

Very nice Marv! This is something that I see an immediate need for. It reminds me of a mouse for a computer and should be as easy to use. I also like that I should be an easy "all lathe" type project.

I might ask what are the the OD's on this particular scriber? I could see having several made up in different dimensions or even the same dimension with one or more set for common scribing needs. It is certainly a cheap and easy solution to small dimension scribing.

Quote:

---

Originally Posted by wizard69

Very nice Marv! This is something that I see an immediate need for. It reminds me of a mouse for a computer and should be as easy to use. I also like that I should be an easy "all lathe" type project.

I might ask what are the the OD's on this particular scriber? I could see having several made up in different dimensions or even the same dimension with one or more set for common scribing needs. It is certainly a cheap and easy solution to small dimension scribing.

---

The cylinder on mine is 3/4" in diameter but dimensions are non-critical. The diameter of the cylinder holding the scribe determines how far above the surface plate you can set the scribe, if that matters in your application. Thin the bottom of whatever holds the cylinder as much as possible since that thickness affects the height of the scribe when in the six o'clock position. Obviously, mount the scribe as close to the circumference of the cylinder as is practical.

There is no requirement that the body that holds the cylinder be itself a cylinder as in my version. Square or rectangular is fine if that suits your use or available materials.

Marv, I don't normally see a tool made by someone that I cannot get my head around its intended application or a practical use for it. While I can see it being a neatly designed tool I haven't figured out the application. I'll admit that the only time I have ever used a scribe for is to score a line along a straight edge or to follow the edges of a template to create an image of a part or to create intersecting locations for marking holes or a cut.
Perhaps if you could provide a couple of simple in use or application photos my often times foggy mind will be able to grasp what might make it a needful piece for my kit

I suppose there are many applications where its short stature is advantageous but let me describe one from my own experience that will highlight it.

A base casting for a steam engine. One end of the casting has been milled flat to serve as a reference surface. A number of points and lines have to be scribed relative to this surface. However, the casting is not flat; it has a number of "sticky-up" bits such as bearing supports and governor stanchions, etc. so one can't simply lay a square on it and scratch lines.

The solution is to clamp the base to an angle plate and then set that assembly on the surface plate with the base reference surface resting on the surface plate. Now you can use a surface gauge, e.g....

https://www.gamut.com/p/starrett-sur...QaAi4PEALw_wcB

to lay out the lines. However, I needed to lay out some lines close to the surface plate. When the surface gauge is set up to do this, the gauge rod sits vertically and fouls against the "sticky-up" bits of the casting.

The solution is a low profile surface gauge that can get in under the obstructions.

At the time I built it I didn't have a conventional height gauge, e.g....

https://www.gamut.com/p/analog-heigh...uracy-NjYwNTc3

which would probably have done the job just fine. In fact, it was jobs like this that prompted me to buy a height gauge. I now own three of them; they're wonderful, versatile tools.

Thanks I can visualize it now. I twas that I haven't come up against a situation as you described. For me I mostly just use a scribe as a pencil in open areas I have on the occasion though now that you mention it needed a short pencil for marking outlines in tight spaces that is usually when I call on someone with smaller more nimble fingers than mine

Quote:

---

Originally Posted by Frank S

Thanks........usually I call on someone with smaller more nimble fingers than mine

---

I remember a picture of your hand, barely smaller than steam shovel scoop in Rick Sparber's avatar. So, smaller nimble fingers would be just about anyone!

Quote:

---

Originally Posted by Toolmaker51

I remember a picture of your hand, barely smaller than steam shovel scoop in Rick Sparber's avatar. So, smaller nimble fingers would be just about anyone!

---

Aw now you went and hurt my sole remaining unburnt feeling if I could just remember which feeling that was maybe I could split it and have 2 feelings
Have you ever sen the show garage squad? I think that tall thin guy who talks all the time may have larger hands than mine.

Marv
I always get a warm feeling seeing that small wonder and very simple to work. Thank you for sharing.
Nelson

Quote:

---

Originally Posted by Frank S

Aw now you went and hurt my sole remaining unburnt feeling if I could just remember which feeling that was maybe I could split it and have 2 feelings
Have you ever sen the show garage squad? I think that tall thin guy who talks all the time may have larger hands than mine.

---

Not determining a 'winner', but we all know the camera adds 10 pounds...some say 15 or 20!