small car, low height 24", hydraulic scissor lift

[pennswoodsed]

I like this topic ,also. Picking up a car on pinch weld requires good rockers , will you be working on older cars ?
Thanks,Ed

[nixrox]

Thanks for the picture.

I don't want the drive on ramps. I will probably combine some of the ideas for this lift with the ones forwarded by Frank. The 4 lifting points on Honda's are 3 or 4 layers thick so they can take weight. I only specialize on 1996 to 2005 Honda and up here in Alberta we rarely use salt, so the under body parts are usually corrosion free for decades. I have a 1984 Winnie RV and there is not a speck of rust on it.