LinkBack URL
About LinkBacks
![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D66177%23post66177&media=http%3A%2F%2Fimages58.fotki.com%2Fv510%2Fphotos%2F5%2F904975%2F13987759%2FMVC022F-vi.jpg&description=Spark Plug Storage for Chainsaw by astroracer - I worked on the chainsaw over the weekend. It wasn't running quite right so I pulled the plug and put in a new one. That did the trick and it runs like a champ now. I have a LOT of trees to cut down this year...
While I was working on the saw I figured I should pick up a spare plug or two. I thought a good way to store them so the electrodes don't get knocked around is to drill a 1/2" hole in the inside wall of the case and just thread the "Pin It")
I worked on the chainsaw over the weekend. It wasn't running quite right so I pulled the plug and put in a new one. That did the trick and it runs like a champ now. I have a LOT of trees to cut down this year...
While I was working on the saw I figured I should pick up a spare plug or two. I thought a good way to store them so the electrodes don't get knocked around is to drill a 1/2" hole in the inside wall of the case and just thread the plug into it. This keeps the plugs out of harms way and I know where they are now.
This is in the back corner, inside the open area beside the handle. nothing should hurt them here...
Mark
Reply With Quote
Bookmarks