I worked on the chainsaw over the weekend. It wasn't running quite right so I pulled the plug and put in a new one. That did the trick and it runs like a champ now. I have a LOT of trees to cut down this year...
While I was working on the saw I figured I should pick up a spare plug or two. I thought a good way to store them so the electrodes don't get knocked around is to drill a 1/2" hole in the inside wall of the case and just thread the plug into it. This keeps the plugs out of harms way and I know where they are now.
This is in the back corner, inside the open area beside the handle. nothing should hurt them here...
Last edited by astroracer; 06-09-2016 at 06:06 PM.
Paul Jones (06-11-2016)
Post your reply!
Join 41,949 of us and get our 173 Must Read Homemade Tools eBook free.
There are currently 1 users browsing this thread. (0 members and 1 guests)