That looks like an epoxy pour.
The hvac vents are a give away to it being very likely a Pharmaceutical manufacturing facility. Although the coving on the floor is'nt right for a wet area.
When it cures it will be glass smooth as long as nobody messes with it in the interim.
The fellow driving the roller is wearing spiked shoes as well - can be somewhat disconcerting the first time you walk on them!
The spiked roller leaves a miniscule raster impression only visible from the right angle and only if you know to look for it.
We used to redo floors every other year in the factory , even the boiler house which was kept spotless despite using HFO fired boilers.

LinkBack URL
About LinkBacks
Reply With Quote

Bookmarks