LinkBack URL
About LinkBacks
![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D153762%23post153762&media=https%3A%2F%2Fs3.amazonaws.com%2Fhmt-newsletter%2Fhmt_avatar_200.jpg&description="swivel Top Nuts for by Ed Weldon - Way cool!! Cutting that slot with a 4-1/2" angle grinder is way easier than a hack saw. If it goes oversize for the flat stock you use add a shim washer or two to make up the dfference. If you can't get a roll pin an ordinary flat head machine screw into a threaded hole will work. Another way is to do that if you don't have a tap is to use a rivet or even a nail with a countersink under the headless end and peen it out to fill the conical hole sur "Pin It"){kind=spacer}
Way cool!! Cutting that slot with a 4-1/2" angle grinder is way easier than a hack saw. If it goes oversize for the flat stock you use add a shim washer or two to make up the dfference. If you can't get a roll pin an ordinary flat head machine screw into a threaded hole will work. Another way is to do that if you don't have a tap is to use a rivet or even a nail with a countersink under the headless end and peen it out to fill the conical hole surface with a center punch.
Reply With Quote
Bookmarks