Printable View
Tapmatic. By The Toyz. 12:09 video:
https://www.youtube.com/watch?v=62SnWK54Jdo
Previously:
https://www.homemadetools.net/forum/...639#post182523
https://www.homemadetools.net/forum/...225#post172718
https://www.homemadetools.net/forum/...698#post170645
https://www.homemadetools.net/forum/...207#post169078
https://www.homemadetools.net/forum/...007#post157034
https://www.homemadetools.net/forum/...861#post163946
It looks neat, but I don't understand how this can work.
The detent based clutch requires the two halves to separate by some distance, lets call that distance z. So if tapping vertically in a mill or drill press, that will require that the distance between the workpiece and the chuck or collet be forced apart by distance z. But that can't happen in a mill, and is very difficult to make happen in a drill press. So the clutch will remain engaged and you'll break a tap.
I presume it works on the principle that if you stop the feed down, or retract the feed, the tap will continue tapping down until the drive disengages...
When taping I would never engage a power down feed for one the feed rate will never match the TPI or the MPT of the threads .Quote:
Originally Posted by Isambard
This device is more of a feedback clutch once the torque reaches a certain level t is going to try and skip the operator would have to be aware of how much torque feed back is required to force him to let up on the down feed before breaking the tap. User awareness is the key factor here, what works for him may not work all that well for some of the rest of us.
A true tapomatic would reverse direction when lifting the feed handle
Excuse me but did I mention power feed? A drill or a tap has to be fed to engage with the work.
Like drill presses, turret mills have manual feed wheels or handles. Stop feeding or retract the quill
will cause the attachment in question to disengage the drive as the tap engages deeper in the work-piece.
Presumably spindle rotation is then reversed to back out the tap.
I guess we have to wait for the next video. If it works, I will be making one.Quote:
Originally Posted by nova_robotics
Bill