Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 9 of 9

Thread: Tube straightener - GIF

  1. #1
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator
    Supporting Member
    Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    25,446
    Thanks
    7,925
    Thanked 38,618 Times in 11,284 Posts

    186 More Best Homemade Tools eBook

  2. The Following 13 Users Say Thank You to Jon For This Useful Post:

    baja (Jul 25, 2020), byates (Jul 24, 2020), dubbby (Aug 19, 2020), durrelltn (Feb 26, 2022), Home-PC (Jul 25, 2020), jackhoying (Jul 26, 2020), jimfols (Jul 24, 2020), Karl_H (Jul 24, 2020), n9dug (Jul 25, 2020), nova_robotics (Jul 25, 2020), Scotty12 (Jul 25, 2020), Slim-123 (Jul 25, 2020), Tonyg (Jul 25, 2020)

  3. #2
    Supporting Member Karl_H's Avatar
    Join Date
    Sep 2013
    Posts
    790
    Thanks
    603
    Thanked 434 Times in 235 Posts

    Karl_H's Tools
    About $90 (US) each for one size tubing - 3/16, 1/4, 3/8, 1/2 inch

    2000 Tool Plans

  4. The Following User Says Thank You to Karl_H For This Useful Post:

    nova_robotics (Jul 25, 2020)

  5. #3
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools
    Quote Originally Posted by Karl_H View Post
    About $90 (US) each for one size tubing - 3/16, 1/4, 3/8, 1/2 inch
    will also work harden and stiffen the soft copper tubing
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  6. The Following 3 Users Say Thank You to Frank S For This Useful Post:

    Karl_H (Jul 25, 2020), mwmkravchenko (Jul 25, 2020), nova_robotics (Jul 25, 2020)

  7. #4
    Supporting Member DIYSwede's Avatar
    Join Date
    May 2019
    Location
    Stockholm, Sweden...
    Posts
    634
    Thanks
    415
    Thanked 799 Times in 319 Posts

    DIYSwede's Tools
    If I'll ever need one of these, I finally found some use for the roller bearings (608 2RS)
    salvaged from 2 unused pairs of kiddie inlines I scored for 10 bucks at a flea market.
    Just drilling some pieces of leftover angle iron, add the salvaged M8 fasteners and I'm all set...

  8. #5
    Supporting Member Tonyg's Avatar
    Join Date
    Apr 2016
    Location
    Centurion, South Africa
    Posts
    185
    Thanks
    1,635
    Thanked 69 Times in 56 Posts
    A simple and useful little tool.

  9. #6
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,120
    Thanks
    9,978
    Thanked 1,133 Times in 609 Posts

    nova_robotics's Tools
    Quote Originally Posted by Karl_H View Post
    About $90 (US) each for one size tubing - 3/16, 1/4, 3/8, 1/2 inch
    Seems like a thing that should be easily adjustable for at least a small range of tubing sizes.

  10. #7
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools
    Quote Originally Posted by nova_robotics View Post
    Seems like a thing that should be easily adjustable for at least a small range of tubing sizes.
    The tubes need to fit quite close to the radius of the tubing other wise the tubing will be deformed and may come out almost square
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  11. #8
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,120
    Thanks
    9,978
    Thanked 1,133 Times in 609 Posts

    nova_robotics's Tools
    Quote Originally Posted by Frank S View Post
    The tubes need to fit quite close to the radius of the tubing other wise the tubing will be deformed and may come out almost square
    Nope. Works fine.



    If it were collapsing the tube you wouldn't be able to slide it by hand.

  12. #9
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools
    Quote Originally Posted by nova_robotics View Post
    Nope. Works fine.



    If it were collapsing the tube you wouldn't be able to slide it by hand.
    I think you will find that in trying to straighten refrigeration copper you will want the radius to be close to matching, might get away with 1 size smaller tubing if you are careful. The whole point of straightening is not as much to make the length appear perfectly straight as it is to make the tube cylindrical again. Making them straight appeases the inspectors making it round insures good sweat connections easier and faster to cut with tubing cutters as well. I have seen coils of 3/4 & 1" copper that were flattened so much when coiled that inspectors would reject the whole coil if not for a device to make the tubing cylindrical again as it was de-coiled.
    many HVAC guys have a powered machine to do this with drop in cassettes for each size of tubing. Plus having one for each size has another advantage there is no need to adjust the roller centerline for different sized tubing.
    True enough an auto mechanic might only have a couple of sized straighteners for steel lines such as brake and fuel lines 1 for 3/16, 1/4,&5/16" and one for 3/8, 7/16, & 1/2" He might even use the same devices for running copper air lines in the cases of restoring antique trucks but he would also need 1 more to fit the 5/8 &3/4" air lines in that case. It wont matter if the copper is not absolutely perfectly cylindrical as his fittings will be flared connections anyway.



    186 More Best Homemade Tools eBook
    Never try to tell me it can't be done
    When I have to paint I use KBS products

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •