Printable View
Unlocking pin tumbler locks with a lockpick gun.
<video controls autoplay loop>
<source src="https://s3-us-west-1.amazonaws.com/hmt-forum/lockpick_gun.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
Previously:
https://www.homemadetools.net/forum/...990#post100427
https://www.homemadetools.net/forum/...783#post102468
Thanks, it's a proof if needed why we use modern barrels on our locks at workshop and home, but never forget your key or loose it, it's make really a problem…:sweating:
ps. I'm making some advertisement for the locks safe you can put somewhere in your house.
Unfortunately this type of combination key safe is not very secure and easily picked with a simple tool. Also they are usually made of cast alloy which can be broken with a hammer. A tenant fitted one of those to a landlords property and I was asked to remove it, not having the combination I picked it in under three mins with nothing more than a ground down feeler gauge. It is also advisable to check with your insurers as some deem it not to be a break in if the thief has obtained a key. Apologies if this sounds a bit negative but better safe than sorry and no did not have a misspent youth it just that mechanisms have always been of interest to me.
The type of lock on the video can be opened in seconds with two open flat keys for bolts, we learn that in the army to open fast and without noise this type of locks, the bigger ones needs the 16-17 and 18-19 key or an adjustable key and another flat steel tool like the military knife and making a lever it opens instantly by broken the body.Quote:
Originally Posted by olderdan
The lock is only as secure as the manufacturer wants it to be. There are techniques that can be used in the pins which make a lock almost unpickable. Even round "vending machine locks can be easily picked as well. In my previous days as a cop, locksmithing was one thing I studied on my own time. I assisted with opening locks for search warrants etc. so that the cops didn't have to break down the door. Occasionally someone would get locked out of a file cabinet(frequently), a desk, or an office and I was able to assist as well. I used to buy old locks at garage sales and practice picking them open. A pick gun is a great tool I used mine quite a lot.
Have you make some training with this system ?Attachment 27905
It's the most used on good doors make with a sufficient protection of the cylinder against grip, which is their major fragility if they are mounted by a bad worker.
